Needles & Blades


The main function of permanent make-up needles is to penetrate into the protective layers of the epidermis and deliver pigment to the papillary layer of the dermis with minimal damage to the skin. This function entails certain requirements to selecting and using needles in permanent make- up procedures.


Needle/Blade Requirements:

First and foremost, they must be: 

• High-quality 

• Sharp 

• Sterile and disposable for each client. 

Needles for permanent make-up are produced from steel-alloy needle wire. They are sharpened, polished, individually packaged, and pre-sterilized.The success of every procedure depends on the sharpness and quality of a needle. Any contact with an external object will dull the needle and change its geometric form, which, in turn, will impede its penetration into the epidermal tissue and lead to trauma. For example, with the PMU machine switched on, when we dip the tip with the needle into a disposable container with pigments, the needle is dulled from the contact with the bottom of the cap. 

There are many different needles on the market used for PMU procedures from needle cartridges for power operated machines to blades for manual use like microblading. Each needle has a different purpose for a different outcome. Understanding the different needles out there will help you better understand how to choose the correct needles for each procedure. While many of the needles on the market follow the same guidelines, they will vary with each manufacturer. AAI has provided the basic knowledge of these needle guidelines for your better understanding. 


Needle Size:

Each needle has a diameter, regardless of the device used. Diameter can be described as the individual needle size.   

Needle Taper:

Each needle has a taper. A taper is the measurement of the needle point length and may be short, medium, long, or extra long. Short taper produces a larger puncture size with long/extra long creates a smaller puncture size. 


Needle Count:

Each needle grouping has a count. This is how many individual needles are within one configuration. For example, single needle has one needle while triple shader has three.


Needle Configuration: 

Configurations can be round, flat, and magnum. There are also cartridge-type and manual device configurations. 

Round liners is a grouping of needles that are soldered together so the points are close together. The result is more concentrated.Round shaders is a grouping of needles that are soldered together so that the points are further apart. The result is more spread out. 

Flat configurations are needles in a flat, linear pattern that are soldered together so that there is an exact space between needle points. 

Woven magnum is one row of needles that is woven in a way that gives the appearance of two rows. It has a wider configuration and is available in straight or curved. 

Stacked magnum is two rows of side-by-side flat needles with the smaller grouping placed on top of the larger. 

Cartridge-Type needle configurations are encased and inserted into the handpiece of a machine pen. The needles normally retract back into the encasement when the machine is in the off position. Cartridge needles come in all shapes and sizes such as liners, shaders and magnum! 

Manual Device needles can be arranged in flat or round configurations. These are configured specifically for eyebrow hair stroke patterns and may be smaller in diameter than the typical needle.    

Needle Cartridges

Handheld Manual Blades

Scalpa Needles and Blades


Designed for fine lines for creating brow strokes and eyeliner 

• 1RL configuration

• Diamond cartridge 

• Precise impressions 

• Clear cartridge to monitor ink build up    


Designed for lining the lips 

• Aerodynamic cartridge 

• Diamond cartridge 

• Precise impressions 

• Clear cartridge to monitor ink build up    


This needle is specifically used for creating density with ombré eyebrows, filling in brows, and PMU lips. This will give you more coverage on the area and packing more pigment, saving time and creating a different impression.  

• 3RS configuration

• Diamond cartridge 

• Covers more area

• Clear cartridge to monitor ink build up 


This is a great microblade for beginners because of its design. The straight curve line allows for fewer mistakes and fewer errors. Because it is bowed, you have more width but also more options to move around. With this microblade, you can apply a clean-cut straight light or be conservative with the curve if needed. 


This blade offers great retention and depth while still allowing room for rotation as it is designed to bow outward. This is a perfect match for the master that wants to have fun with that extra level of freedom with their microblade.

Disclaimer of Medical and Legal Liability: Scalpa training courses are intended to provide the general knowledge to perform procedures but is not intended to be a substitute for medical advice, diagnosis or treatment. Reliance on the information in this training course for procedural purposes is to be used at your own risk. If you have questions or concerns, contact a medical professional prior to treatment. Scalpa is not held responsible or liable for risks involved with this procedure. 


Scalpa strongly advises each member or student to research their local legislation. It is your sole responsibility to check and clarify all rules and regulations pertaining to your country, state, city and county if you are planning on performing our training program procedures as a professional. Because Scalpa is offered worldwide, we cannot guarantee this information. Please check with your local health department, governing boards and FDA regulations regarding performance of any Scalpa course procedure. Scalpa is not held responsible or liable for legal encounters regarding licensing, regulations, or other legal aspects pertaining to procedural operation.